scanning issues

[randomzones]

When I using everything1.5A, this situation occurred:
When using a external hard drive，after creating a new folder(or anything else), this folder(or anything) cannot be scanned. I want to know if there is a problem with the hard drive or the software, and look forward to finding a solution to this problem.

TIP: this situation will only occurred in a small numbers of hard drives. I have three external hard drives, two of them are fine(without this problem), I just post this topic because 1 hours ago, this problem also occurred in one of these two . Hope this sitation can be solved.

[void]

Thank you for the issue report randomzones,

The next time this occurs:

• In Everything 1.5, from the Tools menu, under the Debug submenu, click Start Debug Logging....
• Create a new folder on your external drive.
  ---Please let Everything sit for 1 minute to catch any errors in the log.
• From the Tools menu, under the Debug submenu, click Stop Debug Logging....
  ---This will open your %TEMP%\Everything Debug Log.txt in Notepad.
• Please upload this file in a bugreport

[void]

Thank you for the debug logs.



> 2024-11-17 20:20:05.175: DeviceIoControl 000900bb 0000000007b8e128 40 0000000007b8d120 4096 failed 87

The USN Journal is in a bad state when attempting to read the USN Journal.



Please try upgrading to the latest alpha: 1.5.0.1383a:
https://www.voidtools.com/forum/viewtopic.php?f=12&t=9787

There has been some improvements to handle this error.



If the issue persists, please try rebuilding your USN Journal:

• In Everything, from the Tools menu, click Options.
• Click the NTFS tab on the left.
• Uncheck Enable USN Journal.
• Click Apply.
• Re-check Enable USN Journal.
• Change Maximum size to: 32768 KB
• Change delta size to: 4096
• Click OK.